Dow Corning®, 3-1944 Series, RTV Conformal Coating, Viscous Liquid, Military Grade, 350 ml Cartridge
Brand | Dow Corning |
---|---|
Series | 3-1944 |
Product Type | RTV Conformal Coating |
Physical Form | Viscous Liquid |
Container Type | Cartridge |
Container Capacity | 350 ml |
Grade | Military Grade |
Chemical Composition | Hexamethyldisilazane Reaction with Silica, Methyltrimethoxysilane, Diisopropoxy di(ethoxyacetoacetyl) titanate |
Application Method | Brush;Flow Coating;Syringe or Needle |
Resistance Properties | Flame Resistant |
Shelf Life | 12 month |
Odor | Alcohol-Like |
Specific Gravity | 1.03 |
Viscosity Measurement | 50000 mPa/s |
Storage Conditions | Tightly Closed and Head or Air Space |
Flash Point | 99 °C |
Maximum Operating Temperature | +392 °F |
Minimum Operating Temperature | +49 °F |
Color | Straw |
Applications | Pin/Solder Joint Coverage, Thin Section Encapsulation, Spot Protection of Pins or Other Devices |
Solventless RTV elastomeric conformal coatings require atmospheric moisture to cure needing no expensive ovens, and various viscosity version facilitate different application methods. This family of coatings is rapidly gaining popularity due to its environmentally friendly and solventless formulations, its rapid cure rates that can be dramatically accelerated by mild heat, and its cost effectiveness. These elastomers, when cured, offer the optimum stress relief for even the most delicate components and interconnections in a variety of service environments. This product line also features coatings manufactured for controlled volatility and many of these products are UL recognized. Conformal coatings are materials applied in thin layers (typically a few mils or microns) onto printed circuits or other electronic substrates. They provide proven, cost effective environmental and mechanical protection to significantly extend the life of the components and circuitry. Underwriters Laboratory (UL) 746E recognition is based on thickness and substrate requirements.
- Flowable
- Compliant to most international regulations
- Room temp cure with optional heat acceleration
- Cures to soft, low stress elastomer
- UL 746 and Mil Spec tested IPC-CC-830
- UV indicator for inspection
- No added solvents