SKF Self-Aligning Ball Bearing, 15 mm ID, 35 mm OD, 14000 RPM, Double Seal
Short Description
SKF Self-Aligning Ball Bearing, 15 mm ID, 35 mm OD, 14000 RPM, Double Seal
$100.00
In stock
SKU
00129076
| Operating Temperature Range | -40 to +210 °F |
|---|---|
| Series | 2200 |
| Maximum Operating Temp | +210 °F |
| minimum operating temp | -40 °F |
| Precision Rating | Not Rated |
| Internal Clearance | C0 |
| Fillet Radius | 0.6 mm |
| Static Load Capacity | 1.76 kN |
| Bore Type | Round |
| Outside Diameter | 35 mm |
| Bore Diameter | 15 mm |
| Overall Width | 14 mm |
| Closure Type | Double Seal |
| Dynamic Load Capacity | 7.41 kN |
| Cage Material | PA66 |
| Finish Coating | Uncoated |
| Maximum Misalignment | 2.5° |
| maximum rpm | 14000 RPM |
| Outer Ring Width | 14 mm |
Double Row Self - Aligning. Radial Self-Aligning Ball Bearing. These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1). Open Bearings. ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores. Sealed bearings. 2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40?C to +100?C. They are sealed for life, so should not be heated above 80?C before mounting and must not be washed out under any circumstances. TN suffix denotes polyamide cage. Supplied with instruction leaflet.
Write Your Own Review